TEJAS TESTING & INSPECTION, INC.

SCHEDULE OF FEES

DESTRUCTIVE TESTING

TENSILE TESTING:

TENSILE, YIELD, % ELONGATION, & REDUCTION OF AREA INCLUDED

STANDARD ALLOYS $ 55.00

STAINLESS MATERIALS $ 70.00

SUPER ALLOYS $ 105.00

ELEVATED TENSILES $ BY QUOTE

CHARPY IMPACT TESTING:

LATERAL EXPANSION & PERCENT SHEAR ARE INCLUDED

ADDITIONAL $10.00 FOR SUB SIZE

CVN (AMB TO -100F)

STANDARD ALLOY $ 90.00

STAINLESS MATERIAL $ 110.00

SUPER ALLOY $ 145.00

CVN (-100 TO -320F)

STANDARD ALLOY $ 110.00

IZOD STANDARD ALLOY $ 120.00

STAINLESS ALLOY $ 135.00

SUPER ALLOY $ 175.00

HARDNESS TESTING:

REPORT ON SAME REPORT AS TENSILE OR CHARPY (PER PUNCH) $ 5.00

FOUR QUADRANT HARDNESS $ 180.00

SINGLE QUADRANT HARDNESS $ 55.00

SURFACE HARDNESS PER REPORTED READING (ROCKWELL & BRINELL)

NOTE: MINIMUM CHARGE OF $65 FOR HARDNESS ONLY PURCHASE ORDERS

RAW STOCK PER BRINNEL PUNCH (IN OUR SHOP) $ 12.50

RAW STOCK PER ROCKWELL PUNCH (IN OUR SHOP) $ 15.00

RAW STOCK PER PUNCH (IN THE FIELD BRINELL HARDNESS ONLY) $ 15.00

FINISHED PARTS PER PUNCH $ 20.00

HEAT TREATMENT TEST SAMPLE (QTC):

NORMALIZE FIRST HOUR $ 50.00

ADDITIONAL HOURS PER HOUR $ 15.00

TEMPER FIRST HOUR $ 50.00

ADDITIONAL HOURS PER HOUR $ 15.00

PWHT PER ASME FIRST HOUR $ 50.00

ADDITIONAL HOURS PER HOUR $ 15.00

AUSTENITIZE, Q & T FIRST HOUR $ 50.00

ADDITIONAL HOURS PER HOUR $ 15.00

SOLUTION ANNEAL PER HOUR $ 60.00

HEAT TREATING (MINIMUM) $ 95.00

STRESS RELIEF $ BY QUOTE

Q&T PREQUALIFICATION (TENSILE, IMPACT, HARDNESS)_____________$ 350.00

CHEMICAL ANALYSIS:

MINIMUM CHARGE $ 65.00

PER ELEMENT $ 15.00

FULL STANDARD CHEMISTRY $ 95.00

CARBON $ 50.00

OXYGEN $ 95.00

NITROGEN $ 85.00

HYDROGEN (WITH SAMPLE SET-UP CHARGE) $ 225.00

BERYLIUM COPPER $ 65.00

POSITIVE MATERIAL IDENTIFICATION (NO CARBON) MINIMUM $ 420.00

POSITIVE MATERIAL IDENTIFICATION (WITH CARBON) MINIMUM $ 620.00

METALLOGRAPHY:

ADDITIONAL PHOTOS PER PHOTO $ 15.00

GRAIN SIZE REPORT $ 85.00

GRAIN SIZE WITH PHOTO & DESCRIPTION $ 125.00

FINE AUSTENITIC GRAIN SIZE (ASTM A6) $ 145.00

PRIOR AUSTENITIC GRAIN SIZE $ 225.00

FERRITE CONTENT $ 125.00

FERRITE MANUAL POINT COUNT (ASTM E562) $ 200.00

MACROETCH $ 175.00

MACROETCH & DECARBURIZATION PER HEMPS 2.225 $ 225.00

INCLUSION RATING PER ASTM E45 METHOD A $ 150.00

INCLUSION RATING PER ASTM E45 METHOD B $ 150.00

INCLUSION RATING PER ASTM E45 METHOD C $ 150.00

INCLUSION RATING PER ASTM E45 METHOD D $ 225.00

CORROSION TEST PER ASTM E262 PRACTICE E $ BY QUOTE

CORROSION TEST PER G28 METHOD A $ 525.00

CORROSION TEST PER ASTM 923 METHOD A $ 175.00

CORROSION TEST PER ASTM A923 METHOD C $ 225.00

CORROSION TEST PER G48 METHOD A $ 225.00

INTERGRANULAR CORROSION ASTM A262

PRACTICE A (OXALIC ACID TEST) $ 150.00

PRACTICE B (FERRIC SULFITE SLFURIC ACID TEST 120 HR) $ 350.00

PRACTICE C (NITRIC ACID TEST 240 HR) $ 595.00

PRACTICE D (NITRIC HYDROFLUORIC ACID TEST 4 HR) $ 295.00

PRACTICE E (COPPER COPPER SULFITE SULFURIC ACID TEST 24 HR) $ 195.00

MISCELLANEOUS:

AMS 2300 OR 2301 (AIRCRAFT QUALITY) 5 OD OR LESS $ 150.00

AMS 2300 OR 2301 (AIRCRAFT QUALITY) 5 OD OR LARGER $ 225.00

HEAT TREATMENT TO 2301 IS AN ADDITIONAL $ 80.00

Testing procedures are conducted within specifications such as API, ASTM, ASME, ANSI and/or customer supplied specifications. Testing equipment is controlled within our quality manual, ASTM E74 and traceable to the National Bureau of Standards.

NON-DESTRUCTIVE TESTING & EXAMINATION

MINIMUM CHARGES (PER PURCHASE ORDER):

IN HOUSE (AT OUR SHOP) ULTRASONIC TESTING $ 95.00

IN HOUSE (AT OUR SHOP) MAG PARTICLE, LIQUID PENETRANT $ 95.00

IN HOUSE (AT OUR SHOP) MAG PERMEABILITY $ 95.00

IN FIELD INSIDE OF HARRIS COUNTY $ 185.00

IN-FIELD OUTSIDE OF HARRIS COUNTY (60 MILES OR LESS) $ 250.00

TRIP CHARGE PLUS COST OF INSPECTION

IN-FIELD PHASED ARRAY ULTRASONIC TESTING $ 250.00

ULTRASONIC TESTING:

PLATE TO ASTM A578 I, II, OR III PER SQUARE FOOT $ .58

PLATE TO ANY FBH SPEC PER SQUARE FOOT $ .70

PLATE TO 100% SCAN PER SQUARE FOOT____________________________$ 1.50

BARS TO ASTM A388 OR SIMILAR SPECIFICATIONS PER OD

0 - 3 PER FOOT $ 1.85

>3 - 5 PER FOOT $ 2.00

>5 - 8 PER FOOT $ 2.30

>8 - 12 PER FOOT $ 2.55

>12 - 15 PER FOOT $ 2.90

>15 AND ABOVE $ BY QUOTE

TUBES TO API 5CT OR SIMILAR SPECIFICATIONS PER OD

0 - 3 PER FOOT $ 2.00

>3 - 5 PER FOOT $ 2.25

>5 - 8 PER FOOT $ 2.30

>8 - 12 PER FOOT $ 2.60

>12 - 15 PER FOOT $ 3.00

>15 AND ABOVE $ BY QUOTE

PHASED ARRAY ULTRASONIC TESTING:

TUBES TO API 5CT OR SIMILAR SPECIFICATIONS PER OD

>4 - 6 PER FOOT $ 2.95

>6 - 8 PER FOOT $ 3.65

>8 - 10 PER FOOT $ 4.15

>10 AND ABOVE $ BY QUOTE

MAGNETIC PARTICLE INSPECTION:

DRY MAG OF BARS OR TUBES PER ASTM E709 OR SIMILAR SPECIFICATIONS PER OD

0 - 3 PER FOOT $ 1.85

>3 - 5 PER FOOT $ 2.10

>5 - 8 PER FOOT $ 2.30

>8 - 12 PER FOOT $ 2.45

>12 - 15 PER FOOT $ 2.95

>15 AND ABOVE $ BY QUOTE

DRY MAG OF FORGINGS $ BY QUOTE

WET MAG OF BARS OR TUBES PER ASTM E709 OR SIMILAR SPECIFICATION PER OD

0 - 3 PER FOOT $ 2.50

>3 - 5 PER FOOT $ 2.70

>5 - 8 PER FOOT $ 2.90

>8 - 12 PER FOOT $ 3.15

>12 - 15 PER FOOT $ 3.35

>15 AND ABOVE $ BY QUOTE

WET MAG OF FORGINGS $ BY QUOTE

LIQUID PENETRANT INSPECTION:

MATERIALS INSPECTED PER ASTM E165 OR SIMILAR SPECIFICATION $ BY QUOTE

GENERAL INFORMATION:

3RD PARTY WITNESS FEE (CHARGE IS PER PO) $ 100.00

EXPEDITE CHARGES

DESTRUCTIVE TESTING FROM RECEIPT OF COMPLETE PO AND TEST PIECE

RESULTS IN 24 HOURS OR LESS - $100 PER TEST

RESULTS IN 48 HOURS OR LESS - $ 50 PER TEST

NON-DESTRUCTIVE INSPECTION CALL FOR PRICING AND LEAD TIME

CERTIFICATION REPORTS- The first 5 reports are included with testing fees.

Additional reports will be a $10.00 per report.

INTERNATIONAL ACCOUNTS- Any orders paid thru wire transfers there will be an additional

$15.00 charge per purchase order to cover bank fees.

TERMS: NET 30 Payments not made within terms maybe subject to interest at the rate of

1.5% per month.

Letters and reports are for the exclusive use of our client to whom they are addressed. Our name may be used only with our prior written approval.

Our letters and reports apply only to the sample tested and/or inspected and do not necessarily represent the quality of other apparently similar or identical materials.